Quectel FC909A Скачать руководство пользователя страница 2

Страница: 2 / 53

Wi-Fi&Bluetooth Module Series

FC909A_Hardware_Design 1 / 49

At Quectel, our aim is to provide timely and comprehensive services to our customers. If you

require any assistance, please contact our headquarters:

Quectel Wireless Solutions Co., Ltd.

Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai

200233, China

Tel: +86 21 5108 6236

Email: [email protected]

Or our local offices. For more information, please visit:

http://www.quectel.com/support/sales.htm.

For technical support, or to report documentation errors, please visit:

http://www.quectel.com/support/technical.htm.

Or email us at: [email protected].

Legal Notices

We offer information as a service to you. The provided information is based on your requirements and we

make every effort to ensure its quality. You agree that you are responsible for using independent analysis

and evaluation in designing intended products, and we provide reference designs for illustrative purposes

only. Before using any hardware, software or service guided by this document, please read this notice

carefully. Even though we employ commercially reasonable efforts to provide the best possible

experience, you hereby acknowledge and agree that this document and related services hereunder are
provided to you on an “as available” basis. We may revise or restate this document from time to time at

our sole discretion without any prior notice to you.

Copyright

Our and third-party products hereunder may contain copyrighted material. Such copyrighted material

shall not be copied, reproduced, distributed, merged, published, translated, or modified without prior

written consent. We and the third party have exclusive rights over copyrighted material. No license shall

be granted or conveyed under any patents, copyrights, trademarks, or service mark rights. To avoid

ambiguities, purchasing in any form cannot be deemed as granting a license other than the normal

non-exclusive, royalty-free license to use the material. We reserve the right to take legal action for

noncompliance with abovementioned requirements, unauthorized use, or other illegal or malicious use of

the material.

Trademarks

Except as otherwise set forth herein, nothing in this document shall be construed as conferring any rights

to use any trademark, trade name or name, abbreviation, or counterfeit product thereof owned by Quectel

or any third party in advertising, publicity, or other aspects.

Содержание FC909A






















































Результаты поиска

Содержание FC909A

Отзывы:

Похожие инструкции для FC909A

Бренды по названию

Популярные бренды

Quectel FC909A, Руководство пользователя

Результаты поиска

Содержание FC909A

Отзывы:

Похожие инструкции для FC909A

Бренды по названию

Популярные бренды