LTE Standard Module Series
EC25 Mini PCIe Hardware Design
EC25_Mini_PCIe_Hardware_Design 72 / 79
Table 48: GNSS Current Consumption of EC25 Mini PCIe Series Module
6.7. Thermal Consideration
In order to achieve better performance of the module, it is recommended to comply with the following
principles for thermal consideration:
On customers’ PCB design, please keep placement of the PCI Express Mini Card away from heating
sources.
Do not place components on the PCB area where the module is mounted, in order to facilitate adding
of heatsink.
Do not apply solder mask on the PCB area where the module is mounted, so as to ensure better heat
dissipation performance.
The reference ground of the area where the module is mounted should be complete, and add ground
vias as many as possible for better heat dissipation.
Add a heatsink on the top of the module and the heatsink should be designed with as many fins as
possible to increase heat dissipation area. Meanwhile, a thermal pad with high thermal conductivity
should be used between the heatsink and module.
Add a thermal pad with appropriate thickness at the bottom of the module to conduct the heat to
PCB.
GSM
voice call
EGSM900 PCL=5 @32.80dBm
370.0
mA
DCS1800 PCL=0 @29.51dBm
221.0
mA
WCDMA voice
call
WCDMA B1 @22.96dBm
829.5
mA
WCDMA B8 @23.21dBm
752.9
mA
Parameter Description
Conditions
Typ.
Unit
I
VBAT
(GNSS)
Searching
(
AT+CFUN=0
)
Cold start @Passive Antenna
75.0
mA
Lost state @Passive Antenna
74.0
mA
Tracking
(
AT+CFUN=0
)
Instrument environment
44.0
mA
Open Sky @Passive Antenna
53.0
mA
Open Sky @Active Antenna
58.0
mA