Quechua Geonaute KEYMAZE 500 HIKE, Руководство пользователя

Страница: 21 / 25

Reference Version Number
KEYMAZE 500HIKE 1 17/11/2011 20/24
KEYMAZE 700TRAIL
Go Back
This mode allows you to return to your start point. You can select a route that you
have already done (turn around) or be guided along a direct route. If you would like
more information on the guiding modes, go to the Guiding section.
Sunset/rise
This information gives you the sunrise and sunset times as well as the time remaining
before the next event
Display
Allows you to adjust the information displayed on the control panel screens in the
same way as in the SETTINGS/DISPLAY menu
Options
Allows you to the change recording options such as the sampling frequency or the
target zones.
5/ Point Of Interest
A POI is a point of interest. It marks distinguishing features, located close to the route of your hike,
like a fountain or a small chapel to visit
There are two ways of creating a POI: during an activity, on the device or using the PC software
a/ Marking a POI during a session
Using the "START" pop-up menu during an activity, select the "MARK A POI". The current position will
then be marked and you can name the point of interest (scroll through the letters with the arrows,
then confirm the option with OK and give it a symbol.
b/ Go to a POI
(do not confuse going to a POI in the main menu with changing route to go to a POI).
You can be guided directly to a point of interest by selecting the GUIDING/POI option and selecting a
POI in the list.
Similarly, you can go directly to a POI located close to the path, while you are being guided along a
route, using the pop-up menu (STAR/GO TO POI).
Then select a point in the list and confirm with OK
You are then guided directly towards the point in question: follow the arrow making sure that the
distance between the current position and the POI is diminishing as you move forwards.