Quechua Geonaute KEYMAZE 500 HIKE, Руководство пользователя

Страница: 18 / 25

Reference Version Number
KEYMAZE 500HIKE 1 17/11/2011 17/24
KEYMAZE 700TRAIL
SAMPLE RATE
Sampling sets the frequency with which the KEYMAZE records
information. The shorter the sampling time, the more accurate the data
will be and, consequently, the shorter the recording time will be.
Setting at 1/2/5 or 10 seconds
This will change the accuracy of the tracks recorded in the software
GEONAUTE SOFTWARE.
ZONE
This parameter helps you stick to a preset pace throughout your session. The KEYMAZE will warn you
if you exceed the preset limits, so that you can monitor effort levels during your exercise.
HR Zone (KEYMAZE 700 only) : You can set an alert, if your heart
rate is higher or lower than a preset rate. Consequently, you can monitor
your effort levels as you exercise.
Speed Zone : Selecting the "speed" zones allows you to monitor 3 types
of speed: horizontal speeds (typically the running speed) and vertical
speeds (ascending and descending (in m/hr)). A target zone defined in
terms of speed allows you to set you speed of ascent and manage your
effort levels better.
OFF : zones are deactivated
ADVISE OF THE PRODUCT MANAGER : When practising lengthy endurance sports
like hiking or trail running, it is useful to monitor one's energy consumption. During
prolonged light exercise, you use up more fat, the reserves of which are almost
inexhaustible in most people, while, just a few minutes of intense exercise can be
enough to tire you out. A target zone in excess of 140 or 150 beats will prevent you
"redlining" and ensure that you reach your destination in good shape.
DETECTION BELT :
This option can only be configured on the KEYMAZE 700.
During the GPS signal search, the KEYMAZE will also
search for your heart rate monitor belt (KEYMAZE 700
only). Remember to position the belt's sensors on the rib
cage, moistening them in order to get a good signal
during your exercise. If the belt cannot be found during
the second attempt, check out the FAQ section (on
www.geonaute.com/fr/forum).
If you do not wish to use the belt, select no during the
search, in which case you will not get any heart rate
information during your exercise.
GPS SIGNAL SEARCH
KEYMAZE searches for the GPS signal.
In order to optimise the GPS signal search, move
away from any buildings or woodland. The GPS
signal will be better if the sky is clear. Once the
signal has been found, the GPS will go
automatically to the exercise screens.