Quechua Geonaute KEYMAZE 500 HIKE, Руководство пользователя

Страница: 12 / 25

Reference Version Number
KEYMAZE 500HIKE 1 17/11/2011 11/24
KEYMAZE 700TRAIL
HR ZONE : (KEYMAZE 700 only) : You can set an alert, if your heart rate is higher or
lower than a preset rate. Consequently, you can monitor your effort levels as you
exercise.
SPEED ZONE : Selecting "speed" zones allows you to monitor 3 types of speed:
horizontal speeds (typically the speed of progress) and vertical speeds (ascending and
descending speed (in m/hr)). A target zone defined in terms of speed allows you to set
you speed of ascent and manage your effort levels better.
OFF : the zones are deactivated
ADVISE OF THE PRODUCT MANAGER:
When practising lengthy endurance sports like hiking or trail running, it is useful to monitor one's
energy consumption. During prolonged light exercise, you use up more fat, the
reserves of which are almost inexhaustible in most people, while, just a few
minutes of intense exercise can be enough to tire you out.
After setting your parameters session, press OK to go to satellites
MODE (and possibly the chest strap if Keymaze 700)
Conseil :
GPS SIGNAL SEARCH
The KEYMAZE searches for the GPS signal.
In order to optimise the search for a GPS signal, move away from buildings or woodland. The GPS
signal will be better if the sky is clear. Once the signal has been found, the GPS will go automatically
to the exercise screens.
Should the GPS signal be too weak, the Keymaze will prompt you to carry out the session indoors. If
you choose this option, you only get the stopwatch and heart rate information (Keymaze 700 only).
BELT
This option can only be configured on the KEYMAZE 700.
During the GPS signal search, the KEYMAZE will also search for your heart rate monitor belt
(KEYMAZE 700 only). Remember to position the belt's sensors on the rib cage, moistening them in
order to get a good signal during your exercise. If the belt cannot be found at the second attempt,
check out the FAQ section (on www.geonaute.com/fr/forum).
If you do not wish to use the belt, select no during the search, in which case you will not get any
heart rate information during your exercise.
Looking for satellite signals.
If the signal is too low,
Keymaze suggest to launch the
session mode "Indoor" With Keymaze 700, it attempts
to capture the signal from
the cardiobelt.