By default the Quattro system is set up for use with a Quattro 600 Auto mover on a single axle caravan. If a Quattro 500 manual
mover is being used or if the system is fitted to a twin axle caravan, the settings must be changed on the handset.
The Quattro handset has a settings menu which allows the user to pair their handset or change operating modes. With the hand-
set powered on, firmly press on the centre of the thumb control button (Fig.1B) for five seconds, this will open the system menu.
Navigate through the system menu moving the thumb control (Fig.1B) up or down. Select the settings icon (gear) by pressing the
thumb control button (Fig.1B) firmly. Once the settings menu is entered, move the thumb control up and down to desired function.
At any point, press multifunctional button (Fig.1C) to go back to previous screen, or hold for two seconds to return to home screen.
To navigate between settings functions move the thumb control up or down, and press thumb control (Fig.1B) down firmly to make
a selection. To change a setting move the thumb control (Fig.1B) right or left and press thumb control (Fig.1B) down firmly to
make a selection. The active option will be shown with a solid white circle in the centre of the icon.
The Quattro mover utilises a thumb control for precise control over speed and direction. The speed of operation is dictated by how
far the stick moves from its centre point, to the outer point. Direction is dictated by the radial position of the thumbstick (moving
the stick from left to right).
Operation - Setup & Handset Pairing
Page 6
Operation - Manoeuvering
Refer to your handset screen to ensure the caravan is orientated in the desired
way. For example if the hitch is at the top of the display, when the thumb control
is moved upwards the hitch side of the caravan will move forward. If the rear of
the caravan is at the top of the display, the rear of the caravan will move forward
when the thumb control is moved upwards.
For smooth operation always begin by moving the thumb control in the general
direction you would like to head (forwards or reverse), the futher the thumb
control moves away from the centre the faster the mover will operate. From this
point progressively move the control radially (sidewards) to acheive a fluid change
in direction. The more the control is moved sidewards the tighter the turning ra-
dius that will be acheived. Note moving the thumb control to the hard right or left
position will engage the spin on the spot function on single axle caravans.
Single axle caravans have the ability to spin on the spot. To engage this, move the
stick into the hard right or hard left position from centre .
The Quattro electronics have an automatic brake feature to prevent caravan run
away on an incline, this can mean when decending with a heavy load the level of
directional control is reduced. For best levels of control decend using the hard
forward and reverse controls, stop periodically and adjust direction with the spin
functions. Full directional controls are available for operation on level ground and
on inclines.
Page 7
Quattro600 Automatic Engagement
The mover is engaged onto the tyres
automatically using an electric motor
that is controlled via the handset.
Quattro500 ManualEngagement
The mover is engaged onto the tyres
manually using the provided engage-
ment tool.
Single Axle Mode
For use with single
axle caravans, all
functions including
spin on the spot are
enabled.
Twin Axle Mode
For use on twin axle
caravans (2 motors).
Spin on spot function
disabled.
AWD Mode
For use on twin axle
caravans (4 motors).
Spin on spot function
disabled.
Handset Pairing
- The handset and control box will arrive pre-paired so this setting is only required when the
handset has lost its pairing or a replacement part has been received. To pair the handset press thumb control button
(Fig.1B) when this icon is displayed in the menu to begin the pairing search process. Ensure the caravan power is
on and hold the handset within 10cm of control box. Once succesfully paired the handset will return to the home
Axle Mode Selection
- By default Quattro systems are set to work in single axle mode, if installed as a twin axle or AWD system this setting should
be changed to suit.
Mover Model Selection
- By default Quattro electronics are set to Quattro 600 Auto mode. If a Quattro 500 manual mover is installed, this
setting should be changed.
QUATTRO500_ELECTRONICS_UM.indd 8
15/08/2019 16:47:54
