© Quatro Air Technologies| MAY 2019 | All rights reserved |
iVAC Premium Series Operation and Maintenence Manual
Page 6
Important Precautions and Instructions
Important Precautions and Instructions
This manual contains critical operating information which if not followed may result in undesired operation
and cause damage to the systyem not covered by warranty. To reduce the risk of severe injury and equipment
damage, read and follow all instructions.
• Read and understand this manual before operating the system.
• Store the manual in a safe place for future reference.
•
In cases of heavy production (i.e., continuous hours of daily operation), the brushes on the Infinity motors
may wear before the one-year warranty is over. Note that is NOT considered a warranty issue. Motor life
is a function of hours used and filter maintenance. They are designed to operat 2000-2500 hours and then
the motor is to be replaced.
•
In some extreme cases, motor life can even be less than 2000 hours; this is usually due to the system
being run at high pressure (due to dirty filters) for extended periods of time, which increases operating
temperature and decreases brush life.
•
A
LWAYS turn system off and disconnect power prior to accessing unit, replacing filters, or servicing
motor(s).
•
To reduce the risk of electric shock, do not expose to excessive moisture, water or rain. Do not
operate the system in areas with excessive moisture
•
Ensure to use proper voltage as indicated on the system.
•
Use only on a grounded electrical circuit. Do not use any two-prong electrical adapters
(ground lift) to defeat the three-pronged plug on the end of the cord
.
•
When servicing the motors, be careful when touching the exterior of the motor as soon as
it has been turned off; it may be hot enough to be painful or cause injury. With modern
motors, this condition is normal when operated at rated load and voltage, as they are built to
operate at higher temperatures.
Allow the unit to cool for 45 minutes before performing any service.
• Do not install or operate the system in an enclosed space or against a wall. Unit may overheat and shut
down. Keep all objects at least 6” away from the casing, especially the discharge grill.
NEVER place the system up against a wall
.
•
Do not kink hose or restrict airflow in any way.
•
All filters must be in place whenever this machine is in operation.
WARNING:
This is a Class A product. In a domestic environment, this product may cause radio interference, in which
case the user may be required to take adequate measures.
