Page 20
© Quatro Air Technologies| JULY 2019 | All rights reserved |
Jet-Stream Tall Operation & Maintenance Manual
Warranty
Warranty
QUATRO Air Technologies warrants its equipment to be free from defect in material and workmanship under normal use
and service for a period of one year from date of shipment . QUATRO’s obligation under this warranty shall be limited to
replacing any parts, thereof, which shall be demonstrated to have been defective . This is expressly in lieu of all other
warranties, express or implied, including the warranties of merchantability and fitness.
QUATRO claims no warranty as to merchantability or as to the fitness of the merchandise for any particular use and
shall not be liable for any loss or damage. No person, firm or corporation is authorised to assume for QUATRO any
other liability in connection with the sale of these goods . Equipment, parts and material manufactured by others and
incorporated in QUATRO’s equipment are warranted by QUATRO only to the extent of the original manufacturer’s liability
to QUATRO Air Technologies Inc .
Disclaimer
THIS WARRANTY DOES NOT COVER
ABUSE, MISUSE, MAINTENANCE NEGLIGENCE, IMPROPER ASSEMBLY,
ACTS OF VANDALISM, ACTS OF GOD, FEAR WEAR, MODIFICATIONS OF THE EQUIPMENT OR INSTALLATION OF
A PART NOT RECOMMENDED BY QUATRO AIR TECHNOLOGIES, AS WELL AS OPERATION OF THE EQUIPMENT
AT VOLTAGES OTHER THAN THOSE SPECIFIED BY QUATRO AIR TECHNOLOGIES INC .
THE SYSTEM IS DESIGNED TO BE CONSTANTLY POWERED
(PLUGGED IN) . USE THE ON/OFF ONLY SWITCH TO TURN THE SYSTEM ON and OFF .
ALWAYS SWITCH THE POWER OFF BEFORE UNPLUGGING THE SYSTEM FROM THE MAIN POWER SOURCE OR
BEFORE CUTTING POWER TO THE RECEPTACLE . FAILURE TO DO SO MAY CAUSE DAMAGE TO THE SYSTEM
THAT IS NOT COVERED UNDER WARRANTY .
QUATRO IS NOT LIABLE FOR MISAPPLIED EQUIPMENT . ALWAYS CHECK SYSTEM VOLTAGE BEFORE PLUGGING
INTO POWER SOURCE .
1) This is a class A product . In domestic environment, this product may cause radio interference in which case the user
may be required to take adequate measures .
2) This filtration system is not intended for use with explosive, highly flammable, or toxic substances or environments.
(Example: where the lower flammability limit may be exceeded, see chemicals' specific MSDS for more information on
these limits .)
3) If you are collecting a flammable material, it is your responsibility to ensure that an ignition source is not introduced
into the collected material. This could be in the form of static discharge, flames, sparks, cigarettes, matches, chemicals
causing exothermic reactions, or any other source of ignition that could ignite the collected material .
4) If you are not sure if your product is explosive or considered highly flammable, you should have it tested before
operating your filtration or dust collection system.
5) Ensure that the system and the installation comply with all local NFPA and OSHA regulations .
6) Always unplug your system when inspecting or performing maintenance .
1) Any changes to the system will void all warranties .
2) Only original Quatro-approved products should be used for repairs of any kind .
WARNINGS:
NOTE:
