background image

64

Select Profile 

iColor Display offers the ability to upload/activate 
profiles. If an Intelli Proof display is used, the activa-
tion will upload the profile to the display´s LUT and 
will register it to and activate it for the operating sys-
tem. This feature can also be used to switch between 
different calibration setups within a minute.

If a non-Quato display is used, the activation will 
register it to and activate it for the operating system.

If a profile is older than 30 days, the software will 
display a warning. It is not recommended to use pro-
files older than 30 days. However, the software will 
not limit the use of older profiles.

Whitepoint Editor

To match two displays to each other or a display to a 
D50 viewing booth, iColor Display offers an easy-to- 
use whitepoint editor.

To perform the adjustment, select „Show as floating 
palette“ and select „Show fullscreen“ with either 
a gray or white background. The gray background 
is best used to adjust two displays to each other 
while the white background is best suited to match 
a display to a viewing booth. To match it to a viewing 
booth, the paper - for which the adjustment should 
be done - must be inside the booth. Keep in mind 
that display(s) and viewing booth need to have a 
quite similar luminance

To adjust the whitepoint, simply move the „Kelvin“ 
slider. Doing so will move the whitepoint exactly up/
down on the black body curve (the target of every 
calibration is at first the black body curve). 

To finetune the luminance, iColor Display can reduce   
the luminance of every display. However, the incre-
ase only works if an Intelli Proof display is connec-
ted. 

If the visual match cannot be fully performed by the 
Kelvin and luminance adjustment, it is possible to 
adjust a color tint. This will move the whitepont away 
from the black body curve.

Notice: 

UDACT will always check if the whitepoint de-

viation from the black body curve is not more than 3 

E. If the „Color Tone“ adjustment moves the white-

iColor Display can upload/activate profiles and register them.

The Whitepoint Editor allows to adjust the whitepoint for a 
screen to screen or screen to viewing booth match.

Содержание iColor Display 3.7










































































Отзывы: