Quato iColor Display 3.7, Руководство пользователя

Страница: 36 / 73

36
Troubleshooting
Before performing any of these steps, make sure
your computer is turned on, the display is plugged
into an outlet, all the cables are connected properly
to your computer and display, and your computer is
not in sleep mode.
If the screen does not display an image:
- Check the cables and connectors again to
make sure they are connected properly to
your computer and the display.
- Make sure your computer is turned on and is
not in sleep mode.
- Make sure that the computer supports the
native resolution and frequency of the
screen.
If the screen is dim or discolored:
- Make sure the display´s color profile is active.
- Reset the screen by using the OSD and
upload the profile again with the iColor
Display Software.
- After years of usage, the backlight will age.
This is typical for TFT displays and not
covered by the warranty.
If the screen is non-uniform:
- Perform a UDACT uniformity measurement. If
the values are within 10% and 4
∆
C, the
display is within the specs for a ISO 12646-
compliant display.
- For ADC-equipped Intelli Proof excellence
and LE displays, Quato offers an ADC-update
service to re-uniform your unit. Call your
local dealer for details.
If the software does not show „Hardware Calibration“:
- Make sure the USB-cable is connected and
the driver is installed properly.
- Make sure you use a Quato Intelli Proof
display. Third party displays cannot be
hardware-calibrated.
If the screen produces an audible noise:
- A litte noise from the backlight inverter does
typically occur and is not an indication of
need for service.
Support