background image

Airborne Enterprise Module Databook

 

 

Quatech, Inc. 

100-8080-120 

7/15/2010 

37 

prohibited per regulations of Industry Canada. The required antenna impedance 
is 50 ohms. 

To reduce potential radio interference to other users, the antenna type and its 
gain should be so chosen that the equivalent isotropically radiated power (EIRP) 
is not more than required for successful communication. 

Operation is subject to the following two conditions: (1) this device may not cause 
interference, and (2) this device must accept any interference, including 
interference that may cause undesired operation of the device. 

11.4  FCC/IOC Modular Approval 

This document describes the Airborne WLN FCC modular approval and the 
guidelines for use as outlined in FCC Public Notice (DA-00-1407A1).  

The WLRG-RA-DP101 is covered by the following modular grants: 

Country 

Standard 

Grant 

North America (US) 

FCC Part 15 

Sec. 15.107, 15.109, 15.207, 15.209, 15.247 

Modular Approval 

F4AWLNG1 

Canada 

RSS 210 

Modular Approval 

39139A-WLNG1 

 

By providing FCC modular approval on the Airborne WLN modules, the 
customers are relieved of any need to perform FCC part15 subpart C Intentional 
Radiator testing and certification, except where they wish to use an antenna that 
is not already certified.  

Quatech supports a group of pre-approved antenna; use of one of these 
antennas eliminates the need to do any further subpart C testing or certification. 
If an antenna is not on the list, it is a simple process to add it to the pre-approved 
list without having to complete a full set of emissions testing. Please contact 
Quatech Technical support for details of our qualification processes. 

Please note that as part of the FCC requirements for the use of the modular 
approval, the installation of any antenna must require a professional installer. 
This is to prevent any non-authorized antenna being used with the radio. There 
are ways to support this requirement but the most popular is to utilize a non-
standard antenna connector, this designation includes the reverse polarity 
versions of the most popular RF antenna types (SMA, TNC, etc.). For more 
details please contact Quatech. 

The following documents are associated with this applications note: 

 

FCC Part 15 

– Radio Frequency Devices 

 

FCC Public Notice 

– DA-00-1407A1  (June 26

th

, 2000)

 

Содержание 802.11B/G









































Отзывы: