Quasar CB-6204/CB-6208 User and Installation Guide
56
9.3.4.2
Network Failure Detection
Settings on the
Network Failure Detection
screen enable the camera to periodically ping another IP
device within the network to detect a network failure, for example, if a video server is disconnected.
By implementing local recording through a microSDXC card, the camera can operate as a backup
recording device for the surveillance system if network communication is lost due to a network
failure.
Figure 57: Network Failure Detection Screen
9.3.4.2.1
Detection Switch
The Administrator can select from the following options:
Select
Off
to disable an alarm (default setting).
Select
On
to enable an alarm.
Select
By
Schedule
to set a schedule. Then click
Please Select
to select up to 10 schedules
from the drop-down list that opens. The selected schedules are displayed in the
Please
Select
text box. To set a schedule, open the
Click
SAVE
after configuring the settings.
9.3.4.2.2
Detection Type
In the text box, enter the IP address to ping and the time interval (in minutes) between pings. Click
SAVE
after configuring the settings.
