Quasar CB-6204/CB-6208 User and Installation Guide
6
No. Cable
Pin
Definition
Remarks
1
RJ45
-
For network and PoE
connections
2
Power (DC 12V*/AC 24V)
(3-pin Terminal Block)
1
DC 12V −
AC 24V 1
Power connection
2
Reserved
GND
3
DC 12V +
AC 24V 2
3
Alarm I/O
(4-pin Terminal Block)
1
Alarm In −
Alarm connection
2
Alarm In +
3
Alarm Out −
4
Alarm Out +
4
Audio I/O
Green
Audio Out
Two-way audio transmission
Pink
Audio-in/Mic-in
5
BNC
-
For analog video output
3.4.1
Waterproofing the Camera Cable Connectors
Follow the instructions below to waterproof the connectors for the different types of cables included
in the system cable. The cables are shown below.
System Cable
RJ45 Cable
IP66 RJ45 Cable
Figure 6: Camera Cables
3.4.1.1
System Cable
To waterproof the system cable
1.
Connect all the required devices to the system cable.
2.
Coat the joints with silicone gel. There should be no gap between the connectors and the
cables. For alarm I/O connector and power connector, make sure the side with wires
attached is also sealed with silicone gel.
Figure 7: System Cable