Quasar CB-6204/CB-6208 User and Installation Guide
46
To enable the SNMP v3 protocol, enter the appropriate data and passwords requested:
Enable SNMP v3
– Select the checkbox.
Security Name
– See note below.
Authentication Type
– Select MD5 or SHA from the drop-down list. See note below.
Authentication Password
– See note below.
Encryption Type
– Select DES or AES from the drop-down list. See note below.
Encryption Password
– See note below.
Note:
You may have to consult with your System Administrator to activate this function.
Traps for SNMP v1/v2/v3
Traps are used by the camera to send messages to a management system for important events or
status changes.
Enable traps
– Check this box to activate trap reporting.
Trap address
– Enter the IP address of the management server.
Trap community
– Enter the community to use when sending a trap message to the
management system. The default value is
public
.
Trap Option
Warm start
– A warm start SNMP trap signifies that the SNMP device, such as the
camera, performs a software reload.
Click
SAVE
when complete.
