Quartz CWM 55, Техническое руководство

Страница: 17 / 26

-17-
ISOLATE THE SYSTEM PRIOR TO FITTING THE KIT IF THE UNIT HAS BEEN INSTALLED
ELECTRIC HEATER KIT
CWM kW Part No. CWM L kW Part No.
55 1.3 55600401 55 1.3 55600411
75 1.8 55600402 75 1.8 55600412
105 2.3 55600403 105 2.3 55600413
ITEM QTY DESCRIPTION ITEM QTY DESCRIPTION SUPPLIED IN KITS
1 1 Coil/element/fuse assy 5 2 Coil clip 55600402/403/412/413
2 3 No.8 screws 6 1 Relay assy 55600401/402/403
3 4 Cable clamps 7 2 No.6 screws 55600401/402/403
4 2 Cable ties 8 1 Terminal 55600411/412/413
9 1 Jumper bar 55600411/412/413
This kit is for use on all CWM and CWM L wall mounted units: it cannot be fitted to CWM L units which have an LPHW
coil assembly
It is easier to fit this kit prior to installing the unit.
1. CABINET REMOVAL
2. FITTING THE COIL/ELEMENT/FUSE ASSEMBLY (numbers refer to diagrams)
a) Secure the assembly to the front of the coil, with the thermal cutout at the top (3xNo.8 screws).
1
b) Ensure there is a space of 20mm between the top of the drain tray and the bottom of the heater coil.
1. On CWM (L) 75 / 105 position the coil clips
2