Quartz CWM 55, Техническое руководство

Страница: 13 / 26

-13-
The PCB is factory set for CWM L units.
No reconfiguration is needed, with or without an electric heater.
CWM L PCB CONFIGURATION
CWM L PCB (FACTORY CONFIGURED FOR CWM L UNITS: JUMPER JMODE NOT REQUIRED)
--o--o--O--O--O--o--o--
OPTIONAL CWM L REMOTE CONTROLLER
CWM L units use an electronic remote control (available separately, part number 55500309).
Any convenient number of units may be operated with one controller.
Infrared operation
Slide open the front cover: press down on the top at
the marked area and push off the cover.
Insert the batteries ensuring correct polarity.
The display will blank and reset.
Replace the cover by sliding into position.
Operating instructions are on page 16.
For convenience, the wall mounting bracket may be secured
to a wall and used to park the controller.
--o--o--O--O--O--o--o--
KEY TO WIRING DIAGRAMS
B Brown W White L Live S1 Condensate sensor
BL Blue Y Yellow M1 Fan motor TP1 Thermal protector
BK Black G/Y Green / yellow M2 Cond pump motor TP2 Thermal fuse
GRY Grey C Capacitor N Neutral V1 Cooling valve
P Pink EH Electric heater PE Protective earth V2 Heating valve
R Red F Fuse RY Relay - -> - - Not supplied
V Violet H Heat / heater RT Remote thermostat