Quantum ValueLoader DLT VS160, Руководство пользователя

Страница: 39 / 88

Operating the ValueLoader
Using Cartridges
ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual 25
Using Cartridges
2
Before you use the ValueLoader, make sure you observe these general
rules:
•
ValueLoader VS80.
Use only DLTtape IV tape cartridges.
•
ValueLoader VS160.
Use only DLT VS1 tape cartridges.
•
Clean the tape drive when the Clean Drive LED is illuminated
, or if there
is any other indication that the drive is having trouble reading or
writing, such as if the Media Attention LED is illuminated, or there is
an exclamation point (!) in the inventory display. Be sure to use only
DLT1 compatible cleaning cartridges. The tape drive rejects all other
types of cleaning cartridges.
Importing
Cartridges
2
This option forces the ValueLoader to import a cartridge into a specific
empty slot in the carousel. To import tapes into the ValueLoader:
1 Make sure the write-protect switch is set as desired for each data
cartridge (see Write-Protecting Cartridges on page 29). If applicable,
install a bar code label into the slide-in slot on the front of each
cartridge (see Bar Code Reader on page 3).
2 From the Home screen or main menu, press the
[+]
or
[–]
button until
Commands
appears on the top line of the LCD screen.
3 Press the
[Enter]
button to access the available options.
4 Press the
[+]
or
[–]
button until
Import
appears on the LCD screen.
Press
[Enter]
to select.
5 Press the
[+]
or
[–]
button until the desired slot number appears on the
LCD screen and press the
[Enter]
button. You are not given the option
to import a cartridge to an occupied slot.
Note: The ValueLoader automatically unloads any other cartridge
types and any cartridges whose format it cannot read. If you
experience any failures with reused Quantum DLT formatted
(degaussed) cartridges, the degaussing may not have been
sufficient to fully erase the data. If this happens, use another
cartridge before suspecting other system components.