Quantum ValueLoader DLT VS160, Руководство пользователя

Страница: 35 / 88

Operating the ValueLoader
Operator’s Panel Overview
ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual 21
These errors can be caused by faulty or improperly degaussed media,
media that has been previously written in an invalid format such as
DLT7000 or DLT8000, or dirty read/write heads in the tape drive. The
Media Attention LED is also be illuminated (see LED Indicators on
page 22). Exporting the indicated cartridge will clear the error condition
(see Exporting Cartridges on page 26 ). If these symptoms occur on
multiple known good cartridges, consider cleaning the tape drive (see
Cleaning the Tape Drive on page 30). If a particular cartridge causes error
conditions repeatedly, that cartridge may be defective or invalid.
Occasionally, you may see the message
In Transit
, which indicates:
• An error condition has caused a cartridge to be left between its slot
and the drive. Power cycle or reset the ValueLoader to clear this
condition.
• A cartridge is unexpectedly found in the Import/Export slot opening.
Power cycle or reset the ValueLoader to clear this condition.
If the tape drive has a cartridge loaded, the top line displays
Drive loaded
.
The cartridge currently loaded in the drive is indicated by an alternating
black block and the slot number as shown in figure 10 . This display can
also indicate that the specified cartridge is being loaded, unloaded,
imported, or exported, as well as indications of read to, write to,
calibrating, and so on. The ValueLoader status line indicates the current
operation. An example of this display is shown in figure 10 .
Figure 10 Operator’s
Panel—Drive Loaded