Chapter 4 Using the FTP File Server
FTP File Transfers
SDLT 600A Product Manual
70
Figure 64
shows the resulting subdirectories created from the OPATOM
partial restore operation (i.e., this is what would be seen if you double-
clicked the folder identified as
partialP2-0005AJ
in
figure 63
).
Figure 64 Partial File List in
OPATOM
The result of the partial restore command is a virtual file. This file must be
retrieved to be completed on the local hard disk.
Retrieve a Virtual File
4
After a successfully completed partial restore (for both OP1A and
OPATOM), you can retrieve the virtual file to the local hard disk.
Once transferred, a MXF-compliant file is saved to its destination
location.
• From the
Contextual
menu, the
Create Header
selection opens a
window (see
figure 65
) to create an MXF header metadata file. The
Create Header
selection supports an absolute pathname, that is, you
can enter a full pathname in the dialog box to set the destination of
the file or folder.This action is used to extract any MXF file’s header
metadata into a separate file. This separate file is user specified to
contain binary or XML data as configured (see
SDLT 600A options
on
page 79). Select the MXF file for which metadata is to be extracted
Note:
The destination of the virtual
must be
set to the local hard disk.