Chapter 2 Installing Your Tape Drive
Managing the Tape Drive
SDLT 600A Product Manual
15
Windows Configuration
2
The host IP configuration may have to be modified to communicate with
the drive.
The following steps can be used to setup and communicate with the
SDLT 600A tape drive:
1
Go to
Network Connections
and click the
LAN
icon.
2
Go to
Internet Protocol (TCP/IP) connection
and click
Properties
(see
figure 9
).
Figure 9 Local Area
Connection Properties
3
In the
General
dialogue box
(see
figure 10
), select the radio button
Use
the following IP address
.
• In the
IP address
box, enter
10.10.10.1
• In the
Subnet mask
box, enter
255.255.255.0
4
Click
OK
.
Note:
The factory default IP address for the SDLT 600A is set to
10.10.10.10
.
Select the TCP/IP
connection
