Chapter 4 Using the FTP File Server
FTP File Transfers
SDLT 600A Product Manual
59
Figure 45 System Refresh
Window
Duplicate File Name
4
When you transfer a file, if there is already a file with the same name in
the destination, there is a conflict and the following window appears:
Figure 46 File Exist Window
•
Overwrite
/
Overwrite all
— Erases the file already on the target and
copies the new file in its place.
Note:
When you perform a transfer between two remote servers (a
procedure called
Server to server
or
File eXchange Protocol
(FXP), data is transferred directly from/to the source remote
server to/from the target remote server, without routing this
data through the client’s workstation. The client has no
indication of the exact progression.
Note:
When you overwrite a file, it is not erased from the tape,
because the tape drive appends data only (unless the file to
overwrite is the last file stored on the tape). However it is
not possible to access the overwritten file (unless the file to
overwrite is the last file stored on the tape).
Note:
The SDLT 600A does not support
Resume
.
