Quantum Scalar Distributed Library Controller 2.7 Скачать руководство пользователя страница 102

Страница: 102 / 324

Library Tab

The Management GUI also allows drag and drop cartridge operations. Refer to

Drag and Drop Operations

on page 87.

Cartridge State

The cartridges contained in the library have a different state. The state indicates a cartridge availability to
accept commands, and so forth.

Table 19

Cartridge States

Cartridge

state

Command

status

Icon

Description

Stored
(shown as
empty)

Active

The cartridge is stored in mailbox or in storage slot. A cartridge
in a storage slot is active for

Move

Mount

and

Export

operations, a cartridge in a mailbox slot is active for

Move

Mount

and

Import

operations.

Mounted

Active

The cartridge is moved to the drive slot and is ready for the
read/write operations. The cartridge is active for

Move

Export

and

Dismount

operations.

Reverse
mounted

Not active

The optical disk is moved to the drive, and its other side is
ready for the read/write operations. The cartridge is not active
until the

Dismount

is done.

Ejected

Not active

The cartridge is exported into a mailbox slot, and a home
position has been saved. The cartridge is not active for any
operations until the

Inventory

is finished.

Unloaded

Not active

The cartridge is exported into a mailbox slot, and a home
position is lost. The cartridge is not active for any operations
until the

Inventory

is finished.

In problem
box

Not active

The cartridge is moved to a problem box. The cartridge is not
active for any operation and remains not active after the

Inventory

. Operator can only physically remove this cartridge

from the library (a home position will be lost then).

Offline

Not active

The cartridge is removed from the library. The cartridge was
not found after the

Inventory

has been executed.

Being
ejected

Not active

The cartridge is moving into a mailbox slot. No commands are
accepted. Temporary state.

Being
inserted

Not active

The cartridge is moving from the mailbox slot. No commands
are accepted. Temporary state.

Содержание Scalar Distributed Library Controller 2.7





































































































































































































































































































































Результаты поиска

Содержание Scalar Distributed Library Controller 2.7

Отзывы:

Quantum Scalar Distributed Library Controller 2.7, Справочное руководство, Страница: 102 / 324

Результаты поиска

Содержание Scalar Distributed Library Controller 2.7

Отзывы: