Quantum Scalar 50 TC2201 iSCSI Bridge Upgrade Instructions
81-81792-01 A01
July 2007
18
TC2201 Upgrade Procedure
e
To create a specific map item, the Index, Bus, and Device can be
selected from the pull-down lists for either
Discovered Device Entry
or
Manual Device Entry
.
Discovered Device Entry
is limited to devices
already discovered.
Manual Device Entry
allows you to manually set
up a device type at a specific
Device Target
and
Device LUN
. To make
the changes permanent, select the
Create Entry
button.
9
After the iSCSI ports are mapped, select the
Activate Mapping Changes
button to dynamically update the current map without rebooting the
TC2201. These changes are made effective immediately after being
submitted.
10
After activating the mapping options for the Ethernet ports, click
Reboot
from the
Main
menu.
The
System Reboot
screen displays (see
figure 19
).
Note:
Maps named
Auto Assigned
may not be modified, cleared,
filled, or have entries removed.
Note:
Map settings are saved to memory when any of the buttons
within the page are selected but are not activated until either
the
Activate Mapping Changes
button is selected or the TC2201
is rebooted.
Caution:
Before activating any port mapping changes, it is strongly
recommended that the user verify there are not any
command or data operations occurring in conjunction
with devices affected by the mapping changes. For
example, deleting a LUN or device from a map may
disrupt I/O transfers with that device. It is the user’s
responsibility to ensure that no operations will be
negatively impacted due to the activation of mapping
changes.
Note:
All current Mapping Settings will take effect immediately! If
another management interface has made unsaved mapping
changes, those changes will be lost.
Note:
If the
Activate Mapping Changes
button is not selected, the
mapping changes will not take effect unless the TC2201 is
rebooted.
