Quantum PX720 Unpacking and Installation Instructions
Document 6444602-04 A01
March 2005
Installing the Quantum PX720 Library
37
• To change the password, use the up and down arrows to select
Change Password and press
Select
. To change the password, enter a
6-digit password using the numbers provided on the OCP. Press
Select
to accept the new password. When prompted, re-enter the
password to confirm.
• To enable autoclean, use the up and down arrows to select Autoclean
and press
Select
.
• To enable the left load port, use the up and down arrows to select Left
Load Port (16) and press
Select
.
• To enable the right load port, use the up and down arrows to select
Right Load Port (32) and press
Select
.
7
When you are finished viewing/editing the setup information, press
Back
twice to return to the
Home
screen.
8
From the
Home
screen, press
Ops
to enter the operations screen.
9
Before the network information can become active, the cabinet must
reboot. To reboot the cabinet, use the up and down arrows to highlight
the cabinet and press
Select
.
10
Use the up and down arrows to select the reboot option and press
Select
.
The library reboots.
