Quantum PX720 Unpacking and Installation Instructions
Document 6444602-04 A01
March 2005
Unpacking the Library
11
8
Remove the front rail from the pallet.
9
Remove the accessory kit from the pallet and place it at a location to be
accessed later.
10
Cut the tape securing the ramp against the library.
11
Use two of the hex 3-3/8 in. hex head bolts, lock washers, and flat
washers removed in
step 7
to secure the ramp to the pallet (see
figure 10
).
Figure 10 Lowering the
Ramp
Positioning the Library
0
To position the library:
1
Map out a route to the installation site (see the
Quantum PX720 Pre-
Installation Site Survey Instructions
).
2
Remove the four restraining bolts securing the PX720 to the shipping
pallet (see
figure 11
) using a 3/4 in open-end wrench.
Hex head bolts
Ramp
