Quantum PX500 Series, Руководство пользователя

Страница: 143 / 294

Chapter 3 Quantum PX500 Series Remote Management
Setup
Quantum PX500 Series User’s Guide 120
agents , store data about themselves in Management Information Bases
(MIBs) and return this data to the SNMP requesters.
1 Under
Community Names
(see figure 80 ), click
New
to enter the new
community information:
a A unique name in the
Name
field, the field holds up to 60
characters. No blank spaces are allowed.
b IP address in the
IP Address
field, if the value in the Network
Mask edit box ends in a zero, the value in the IP address edit box
must also end in a zero
c Subnet mask in the
Network Mask
field.
d Access rights for the new community:
•
Read Only
allows SNMP
read
operations:
•
Read/Write
allows both SNMP
read
and
write
operations.
2 Click
Save
.
A
Results
page displays indicating the community has been added.
3 Click New in the Trap Destination area (see figure 80 ), to set the IP
addresses that are to receive the traps generated by the
Quantum
PX500 Series,
for example,
12.34.56.78
.