Quantum PX500 Series, Руководство пользователя

Страница: 142 / 294

Chapter 3 Quantum PX500 Series Remote Management
Setup
Quantum PX500 Series User’s Guide 119
Table 26 Send Email Test
SNMP
3
If the customer wishes to use the Quantum PX500 Series system with a
network framework application such as HP OpenView, or CA Unicenter,
the SNMP configuration must be defined. SNMP stands for Simple
Network Management Protocol , a set of protocols for managing complex
networks. SNMP works by sending messages, called protocol data units
(PDUs), to different parts of a network. SNMP-compliant devices, called
Message Type:
Warning When a warning state exists on the Quantum
PX500 Series system such as an overtemp
condition, an email is sent to everyone on the
warning recipient list.
Message Type:
Informational When an informational event has occurred on the
Quantum PX500 Series system such as starting
up or shutting down the system, an email is sent
to everyone on the operator access recipient list.
New To add a new recipient to a specific list, type the
email address of the new recipient in the field
and click Save .
Edit To edit a recipient, select the individual email
address from the list and click
Edit
.
Remove To remove an email notification type from the E-
mail list, select the E-mail type and click
Remove
.
Field Description
Send Test
To test the email notification system, click
Send
Test
. An email is sent to the critical e-mail
recipients list. If the test email is not successful,
verify the email server information and the
critical recipients list and try again.
Field Description