32
Initial Configuration
DXi6701/DXi6702 Installation and Configuration Guide
4
Under
General
, enter the following network information as provided by your
network administrator:
a
Enter the
Hostname
used to identify the DXi6701/DXi6702 system.
The
Hostname
cannot be blank and must contain only letters
[ A–Z, a–z ], numbers [ 0–9 ], hyphens [ - ], underscores [ _ ], and dots [ . ].
b
(Optional) Enter the
Default Gateway
IP address.
Specifying a default gateway is optional if all access is local to a particular
subnet. For example, if the DXi6701/DXi6702 and all of its clients are on the
same subnet, you do not need to specify a default gateway.
Caution:
Specifying a default gateway is required to enable connectivity
with all subnets other than those that the DXi6701/DXi6702 is
directly connected to. For example, if the DXi6701/DXi6702 and its
clients are on different subnets, you must specify a default
gateway.
c
(Optional) In the
DNS Suffix Search List
box, enter the local domain to search
first when resolving domain names.
The domain suffix is a single domain name. The domain name may contain only
letters (A–Z), numbers (0–9), dots (.), and hyphens (-).
d
(Optional) In the
Primary
,
Secondary
, and
Tertiary DNS IP Address
boxes, enter
the IP address of up to three DNS servers used to resolve domain names and
translate them into IP addresses.
Caution:
You must specify a DNS IP address if you plan to use hostname
format when configuring an NTP time server, outgoing e-mail
server, replication sources and targets, and other information.
5
Under
IP Address Configuration > Bonding Details
, configure each Ethernet port
as a separate network device:
a
If necessary, click the
Show
link to show the bonding details table.
b
In the
Not Bonded
row, make sure each Ethernet port is selected (
eth0
,
eth1
,
and so on).
c
If necessary, click
Update
to save the changes you made to the
Bonding Details
table.
6
Do not make any changes under
IP Address Configuration > Interface Details
unless directed by your network administrator. (For more information about the
VLAN tag and MTU size options, see the “Network” section in the
Quantum
DXi6000 User’s Guide
, 6-67199).
7
Under
IP Address Configuration > IP Address Table
, enter network information
for the
eth0
device:
Note:
Do not make any entries in the
VLAN ID
,
External Host IP
,
NATed
, or
NAT
IP Address
columns unless directed by your network administrator.
Содержание DXi6701
Страница 2: ......
Страница 33: ...Initial Configuration 31 DXi6701 DXi6702 Figure 21 Getting Started Wizard Network ...
