18
Initial Configuration
DXi4000 Installation and Configuration Guide
4
Under
General
, enter the following network information as provided by your
network administrator:
a
Enter the
Hostname
used to identify the DXi4000 system.
The
Hostname
cannot be blank and must contain only letters
[ A–Z, a–z ], numbers [ 0–9 ], hyphens [ - ], underscores [ _ ], and dots [ . ].
b
(Optional) Enter the
Default Gateway
IP address.
Specifying a default gateway is optional if all access is local to a particular
subnet. For example, if the DXi4000 and all of its clients are on the same subnet,
you do not need to specify a default gateway.
Caution:
Specifying a default gateway is required to enable connectivity
with all subnets other than those that the DXi4000 is directly
connected to. For example, if the DXi4000 and its clients are on
different subnets, you must specify a default gateway.
c
(Optional) In the
DNS Suffix Search List
box, enter the local domain to search
first when resolving domain names.
The domain suffix is a single domain name. The domain name may contain only
letters (A–Z), numbers (0–9), dots (.), and hyphens (-).
d
(Optional) In the
Primary
,
Secondary
, and
Tertiary DNS IP Address
boxes, enter
the IP address of up to three DNS servers used to resolve domain names and
translate them into IP addresses.
Caution:
You must specify a DNS IP address if you plan to use hostname
format when configuring an NTP time server, outgoing e-mail
server, replication sources and targets, and other information.
5
Under
IP Address Configuration > Bonding Details
, configure each Ethernet port
as a separate network device:
a
If necessary, click the
Show
link to show the bonding details table.
b
In the
Not Bonded
row, make sure each Ethernet port is selected (
eth2
,
eth3
,
and so on).
c
If necessary, click
Update
to save the changes you made to the
Bonding Details
table.
6
Do not make any changes under
IP Address Configuration > Interface Details
unless directed by your network administrator. (For more information about the
VLAN tag and MTU size options, see the “Network” section in the
Quantum
DXi4000 User’s Guide
, 6-67092).
7
Under
IP Address Configuration > IP Address Table
, enter network information
for the
eth2
device:
Note:
Do not make any entries in the
VLAN ID
,
External Host IP
,
NATed
, or
NAT
IP Address
columns unless directed by your network administrator.
a
Select the
eth2
row in the table.
Содержание DXi4520
Страница 2: ......
Страница 19: ...Initial Configuration 17 DXi4000 Figure 14 Getting Started Wizard Network...
