Quantum DX100, Руководство пользователя, Страница: 100 / 158

Chapter 3 DX-Series Remote Management
Remote Alerts
Quantum DX-Series User’s Guide 81
Table 26 SNMP Trap
Selections
3
Click
Apply
.
A
Results
page displays indicating the configuration has been
changed.
4
Click
New
in the Trap Destination area (see figure 54 ), to set the IP
addresses that are to receive the traps generated by the
DX-Series
system,
for example,
12.34.56.78
. Up to five trap destination
addresses may be set. If less than five trap destinations are required,
leave unused
Trap Destination
fields blank.
Field Description
Informational
If selected,
Informational Traps
are enabled.
Warning
If selected,
Warning Traps
are enabled.
Failure
If selected,
Failure Traps
are enabled.
Available
If selected, a trap is generated every time
the library transitions from an unavailable
to an available state.
Unavailable
If selected, a trap is generated every time
the library transitions from an available to
an unavailable state.