Page 3
For technical questions, please call 1-888-866-5797.
Item 58476
Charging Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
1. Twist the adjustable band near the top of
the Flashlight to expose the USB port.
2. Insert the provided USB cable
into USB port. See below.
USB
Port
3. Insert the other end of the cable
into a powered USB port.
4. The Charge Light Indicator will light up Red
during charging. After approximately 3 hours
the Charge Light Indicator turns Green,
indicating the Flashlight is fully charged and
ready for use. Unplug the USB cable.
5. Li-Ion BATTERY MUST BE RECYCLED OR
DISPOSED OF PROPERLY.
Do not short, incinerate or open battery.
NOTICE:
Do not leave the Battery in a discharged
state. Charge the Battery every 3 months if the
Flashlight is not in use. This will keep the Battery
from wearing down and add to its life. Do not charge
the Flashlight at temperatures below 40° F.
Battery Replacement
1. Unthread the base of the Flashlight.
Base
2. Remove the old battery, noting polarity.
3. Insert a new 3.7V, 2200mAh Li-ion battery
into the flashlight, positive end first.
Operation Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
NOTE:
Before using Flashlight for the
first time, fully charge the Battery.
1. Press the Power button at the bottom of the light
once to turn on maximum brightness mode.
2. Press again to switch the light to economy mode.
3. Press a third time to turn the light off.
4. To turn on TURBO mode, press and hold
Power button for three seconds.
5. When finished using the Flashlight,
store indoors away from children.
NOTICE:
Do not open the housing, there
are no user-serviceable parts inside.
