14
Installing the 3U Rackmount Enclosure in a Rack
LTO-5 Full-Height Tape Drive
12
Connect a SAS cable to the back of the 3U enclosure (see
Figure 1
on page 2) for
every SAS device in the 3U enclosure.
13
Connect the power cable to the back of the 3U enclosure (see
Figure 2
on page 2).
14
Secure the system cables at the back of the 3U enclosure to the cable reel and cable
bracket as shown in
Figure 16
.
Figure 16 Securing the System
Cables
Cable reel
Cable bracket
The 3U rackmount enclosure installation is complete.
