Installing the 3U Rackmount Enclosure in a Rack
11
LTO-5 Full-Height Tape Drive
Caution:
It is important to install rack components level. To ensure that the 3U
rackmount enclosure is installed correctly it may be necessary to measure
the height of the correct mounting holes in the front and rear vertical
mounting bars.
Installing the 3U
Enclosure
To install the 3U enclosure:
1
Attach the template to the front of the rack (see
Figure 11
).
2
Using a pencil, mark the holes for the front tabs of the spring-loaded rack rails, and
mark the top and bottom edges of the template for additional installations.
Figure 11 Attaching the
Template to the Rack
Mark with pencil
Template
3
Repeat steps 1 and 2 for the back of the rack.
4
Install the spring-loaded rack rails (see
Figure 12
):
a
From the back of the rack, insert the front tabs of the spring-laded rack rail into
the proper holes.
b
Press the rail forward and insert the rear tabs of the spring-loaded rack rail into
the proper holes.
c
The rail locks into place securely.