background image

Quantum 6000 XL

   www.quantumrehab.com

33

How should I store my power chair and its batteries?
If you do not use your power chair regularly, we recommend maintaining battery vitality by charging the batteries at least
once per week.

If you do not plan on using your power chair for an extended period, fully charge the batteries prior to storage. Disconnect
the battery harnesses and store the power chair in a warm, dry environment. Avoid temperature extremes, such as freezing
and excessively hot conditions, and never attempt to charge a frozen battery. A cold or frozen battery should be warmed
for several days prior to recharging.

What about public transportation?
AGM and Gel-Cell batteries are designed for application in power chairs and other mobility vehicles. These batteries are
Federal Aviation Administration (FAA) approved, allowing safe transportation on aircraft, buses, and trains, as there is no
danger of spillage or leakage. We suggest you contact the carrier’s ticket counter in advance to determine that carrier’s
specific requirements.

What about shipping?
If you wish to use a freight company to ship your power chair to your final destination, repack your power chair in the
original shipping container and ship the batteries in separate boxes.

V I .   B A T T E R I E S   A N D   C H A R G I N G

Содержание 6000 XL




















































Отзывы: