manualshive.com logo in svg

Quantum Rehab 6000 XL, Руководство пользователя, Страница: 28 / 51

Поделиться
Скачать
Quantum Rehab 6000 XL Скачать руководство пользователя страница 28

28

www.quantumrehab.com

Quantum 6000 XL

Figure 22. Swing-Away Footrests

ADJUSTMENT
SCREWS

FOOTREST
EXTENSION

SFR  RELEASE  LEVER

ADJUSTMENT
SCREWS

RELEASE  LEVER B

Figure 23. Elevating Leg Rests

RELEASE  LEVER A

LEG REST
EXTENSION

Swing-away Footrests

Swing-away Footrests (SFRs) enable you to rotate the foot-
rests to the side before you transfer onto or off or your power
chair. See figure 22.

To rotate the SFRs:
1. Push in the release lever.
2. Rotate the SFRs.

To adjust the SFR length:
1. Remove the two adjustment screws from the back of

each footrest extension.

2. Slide the footrest  up or down to the desired length.
3. Reinstall the two adjustment screws.

Elevating Leg Rests

Elevating Leg Rests (ELRs) offer an infinite range of ad-
justment for the leg angle and a footrest adjustment range
of 12–19 in. See figure 23.

To rotate the ELRs:
1. Push in release lever A.
2. Rotate the ELRs.

To adjust the ELR angle:
1. Push down release lever B.
2. Move the leg rest to the desired angle.

To adjust the ELR length:
1. Remove the two adjustment screws from the back of

each leg rest extension.

2. Slide the leg rest up or down to the desired length.
3. Reinstall the two adjustment screws.

Heavy Duty Drop-in Leg Rests

You can adjust the forward/back position, as well as the
length of the heavy duty drop-in leg rests. See figure 24.

To adjust the forward/back position:
1. Remove the adjustment bolt from each side rail.
2. Move the leg rest hanger in or out to the desired position.
3. Align the adjustment holes in the leg rest hanger with

those in the side rail.

4. Reinstall the adjustment bolts to secure the leg rest

hangers.

V .   C O M F O R T   A D J U S T M E N T S

ADJUSTMENT BOLT

ADJUSTMENT SCREWS

Figure 24. Heavy Duty Drop-In Leg Rests

LEG REST
HANGER

LEG REST
EXTENSION

Содержание 6000 XL




















































Отзывы:

Нет отзывов