Chapter 3
KuDoz 7X
47
Password Setting
When this function is selected, the following message appears at the center of the
screen to assist you in creating a password.
ENTER PASSWORD
Type the password, up to eight characters, and press <Enter>. The password typed
now will clear any previously entered password from CMOS memory. You will be
asked to confirm the password. Type the password again and press <Enter>. You
may also press <Esc> to abort the selection.
To disable password, just press <Enter> when you are prompted to enter password.
A message will confirm the password being disabled. Once the password is disabled,
the system will boot and you can enter BIOS Setup freely.
PASSWORD DISABLED
If you have selected
System
in Security Option of BIOS Features Setup menu,
you will be prompted for the password every time the system reboots or any time you
try to enter BIOS Setup.
If you have selected
Setup
at Security Option from BIOS Features Setup menu,
you will be prompted for the password only when you enter BIOS Setup.
Supervisor Password has higher priority than User Password. You can use Supervi-
sor Password when booting the system or entering BIOS Setup to modify all settings.
Also you can use User Password when booting the system or entering BIOS Setup
but can not modify any setting if Supervisor Password is enabled.
Boot with BIOS defaults
If you have made all the changes to CMOS values and the system can not boot with
the CMOS values selected in setup, clear CMOS after power-down, then power on
again. System will boot with BIOS default settings.
KD7Xen2.p65
02-9-10, 11:43
47
