Installation Instructions
QDI
10
ACPI LED Connector (ACPI LED)
The ACPI LED is a dual-color light with three pins. Pin1and Pin2 drive different color
lights. If Pin1 drives the orange light , then, Pin2 drives the green light, the following
status will come out. When the system is in S0 status, the LED is green on. When the
system is in S1 status, the LED is green blink. When the system is in S3 status, the
LED is orange on. When the system is in S4, S5 status, the LED is off.
Hardware Green Connector (SLEEP SW)
Push once the switch connected to this header, the system enters suspend mode.
Smart Card Reader Connector( SCR )(Optional)
The SCR includes a standard UART to control Smart Card interface handshaking and
then performs data transfers. The SCR can be used for a broad range of applications
in GSM, ID, pay TV, banking and so forth. It also provides a Smart Card clock divider for
those ICC (Integrated Circuit Card) without internal clocks. If use this function, set
UART Mode Select to SCR in the INTEGRATED PERIPHERALS section of the BIOS.
1
SCRST#
VCC
NC
NC
SCPWCTL#
SCIO
GND
LED
SCPSNT
SCCLK
KD7Xen2.p65
02-9-10, 11:41
10
