TPA-MHL-8R - Quick Start Guide
68-00224 - Rev. A4
Page 9
August 31, 2011
Use the procedure below to make the connections to the TPA-MHL-8R for conducting basic
functional tests of an MHL source device.
1. Apply power to the TPA-MHL-8R using the power adapter provided.
2. Make the connections as shown in the diagram below. For this application you will be using
the section on the TPA-MHL-8R labeled
882 CONNECTIONS
– SOURCE DUT.
a. Connect an MHL cable from the MHL source device under test to the MHL IN FROM
DUT connector on the TPA-MHL-8R.
b. Connect an HDMI cable from the HDMI OUT connector of the TPA-MHL-8R to the
HDMI IN connector on the HDMI HDTV.
3. Monitor the HDTV for proper operation.
Connect MHL
cable to MHL
mobile device
(MHL source)
Connect HDMI
cable to HDMI
IN port on
HDMI HDTV
