Quantrax Computherm E Series, Руководство по эксплуатации

Страница: 35 / 43

- 35 -
switch be tween programming modes as follows:
- 12345,67: 5+2 mode
- 123456,7: 6+1 mode
- 1234567: 7+0 mode
c) Switches belonging to a given programming mode are
below the indication of the programming mode. You can
modify data (time, temperature) of switches by tapping
the value concerned.
d) To complete programming and return to the screen
belonging to the thermostat touch the < icon in the upper
left corner.
Programs that were set earlier can be checked at any
time by entering the programming mode again.
•
On the thermostat:
a) To enter programming mode touch the button for
approximately 5 seconds. Then on the display the legend
“ LOOP ” appears in place of the hour, and the indication
belonging to the currently selected programming mode
replaces the current day.