Quantrax Computherm E Series, Руководство по эксплуатации

Страница: 19 / 43

- 19 -
8. BASIC OPERATION OF THE THERMOSTAT
When switched on, the thermostat controls the connected
device(s) fan coil and valve adjuster) based on the measured
and cur rently set (manually or programmed) temperature, the
switch ing sensitivity of the thermostat (factory default ± 0.2 °C).
This means that if the thermostat is set to heating mode and 22
°C, at a switching sensitivity of ±0.2 °C, the thermostat’s output
re lays will close at temperatures below 21.8 °C and opened at
temperatures above 22.2 °C.
Attention! The operation of the outputs largely depends on the
operating modes that can be changed in the thermostat settings.
For proper operation, read chapter 10 carefully. When the outputs
are switched on, the 230 V mains voltage is displayed!
The switched-on state of the fan output is indicated by one of
the icons on the display, the switched-on state of the
valve outputs is indicated by the and icons on the
display.
Attention! Keep in mind that in case of a power outage any
setting of the thermostat will be stored on an external server
therefore updating of data on the server takes a few seconds.
Accordingly, when you modify some setting of the thermostat
(operation-related setting, programming, set temperature, etc.)