Quantel Medical Axis II PR, Руководство по обслуживанию

Страница: 21 / 37

Rev 10-2009
SERVICE MANUAL
P - 21
6 - SOFTWARE UPGRADE
6-1 S/W VERSION COMPATIBLITY
6-2 UPGRADING TO V5.0
Version 5.0 can be installed only on specific device hardware that has been
designed for, i.e. with a pachymetry connector on the rear panel and a
handle. Refer to section 6-5 for further details.
6-3 UPGRADING TO V4.04
Version 4.04 supports the external USB keyboard or a storage USB key or
a USB hub to be connected to the USB port. Ensure the device has USB
ports on the rear panel and no pachymetry connector.
Refer to the installation guide XE AX2 NI AN-FR for further details.
Note : the software version number is displayed on the main page at the
top right corner. The next paragraphs detail the recommendations when
upgrading to a specific version.
6-4 UPGRADING TO V3.XX, 2.XX OR 1.XX
Refer to the above table for version compatibility before upgrading to a
specific version. Then carefully follow section 6-5 that details the
upgrading procedure.
(to)
UPGRADE
(from)
V1.11 V2.04 V3.05 V4.04 V5.0
V1.xx Y - - - -
V2.xx - Y - - -
V3.xx - -
Y
- -
V4.xx - - - Y -
V5.0 - - - - Y