Quanta Computer QuantaMesh, Руководство пользователя

Страница: 983 / 1020

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | IPv6 Commands 983
prefix, given as a decimal value that indicates how many of the high-order contiguous bits of the
address comprise the prefix (the network portion of the address). A slash mark must precede the
decimal value.
ge length: (Optional) If this option is configured, specifies a prefix length greater than or equal to the
ipv6-prefix/prefix-length. It is the lowest value of a range of the length.
le length: (Optional) If this option is configured, specifies a prefix length less than or equal to the
ipv6-prefix/prefix-length. It is the highest value of a range of the length.
description: A description of the prefix list. It can be up to 80 characters in length..
renumber: (Optional) Provides the option to renumber the sequence numbers of the IPv6 prefix list
statements with a given interval starting from a particular sequence number. The valid range for
renumber-interval is 1 - 100, and the valid range for first-statement-number is 1 - 1000.
8.6.2.2 match ipv6 address
Use this command to configure a route map to match based on a destination prefix. prefix-list
prefix-listname identifies the name of an IPv6 prefix list used to identify the set of matching routes. Up to
eight prefix lists may be specified. If multiple prefix lists are specified, a match occurs if a prefix matches
any one of the prefix lists. If you configure a match ipv6 address statement within a route map section
that already has a match ipv6 address statement, the new prefix lists are added to the existing set of
prefix lists, and a match occurs if any prefix list in the combined set matches the prefix.
To delete a match statement from a route map, use the no form of this command.
Syntax
match ipv6 address prefix-list <prefix-list-name> [prefix-list-name...]
no match ipv6 address prefix-list <prefix-list-name> [prefix-list-name...]
Default Setting
No match criteria are defined by default.
Command Mode
Route Map Config
Parameter
prefix-list-name: The name of a prefix list used to identify the set of matching routes. Up to eight
prefix lists may be specified.
8.6.2.3 set ipv6 next-hop (BGP)
To set the IPv6 next hop of a route, use the set ipv6 next-hop command in Route Map Configuration
mode. When used in a route map applied to UPDATE messages received from a neighbor, the
command sets the next hop address for matching IPv6 routes received from the neighbor.
When used in a route map applied to UPDATE messages sent to a neighbor, the command sets the next
hop address for matching IPv6 routes sent to the neighbor. If the address is a link local address, the
address is assumed to be on the interface where the UPDATE is sent or received. If the command
specifies a global IPv6 address, the address is not required to be on a local subnet.
To remove a set command from a route map, use the no form of this command.