Quanta Computer QuantaMesh, Руководство пользователя

Страница: 703 / 1020

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Routing Commands 703
6.3.2.17 area virtual-link authentication
area virtual-link authentication command configures the authentication type and key for the OSPF
virtual interface identified by <areaid> and <neighbor>. The <neighbor> parameter is the Router ID of
the neighbor. The value for <type> is either none, simple, or encrypt. The [key] is composed of standard
displayable, non-control keystrokes from a Standard 101/102-key keyboard. The authentication key
must be 8 bytes or less if the authentication type is simple. If the type is encrypt, the key may be up to 16
bytes. Unauthenticated interfaces do not need an authentication key. If the type is encrypt, a key id in the
range of 0 and 255 must be specified.The default value for authentication type is none. Neither the
default password key nor the default key id are configured.
no area virtual-link authentication command configures the default authentication type for the OSPF
virtual interface identified by <areaid> and <neighbor>. The <neighbor> parameter is the Router ID of
the neighbor.
Syntax
area <areaid> virtual-link <neighbor> authentication {none | {simple <key>} | {encrypt <key> <keyid>}}
no area <areaid> virtual-link <neighbor> authentication
Default Setting
None
Command Mode
Router OSPF Config Mode
6.3.2.18 area virtual-link dead-interval
area virtual-link dead-interval command configures the dead interval for the OSPF virtual interface on
the virtual interface identified by <areaid> and <neighbor>. The <neighbor> parameter is the Router ID
of the neighbor. The range for seconds is 1 to 65535. no area virtual-link dead-interval command
configures the default dead interval for the OSPF virtual interface on the virtual interface identified by
<areaid> and <neighbor>. The <neighbor> parameter is the Router ID of the neighbor
Syntax
area <areaid> virtual-link <neighbor> dead-interval <seconds>
no area <areaid> virtual-link <neighbor> dead-interval
Default Setting
40
Command Mode
Router OSPF Config Mode