Qualstar XLS Series, Руководство по планировке объекта

Страница: 39 / 42

XLS Library Site Planning Guide 4-1
4 Installation Check List
This chapter provides a check list of the components, options, and accessories needed to
install an XLS tape library. For more information, refer to the
XLS Library Installation
Manual .
Important: Before starting the installation, obtain any planning
diagrams or documents created when determining what
XLS equipment to order. You can refer to these
documents as you install the tape drives and cartridges,
connect the SCSI or Fibre Channel cables, and configure
the logical libraries.
After the XLS order is placed, Qualstar builds the library to the requested specifications
and preinstalls the drive bays, cartridge slots, I/O ports, Host Bus Adapters (HBAs), and
the power supplies. The equipment rack (if ordered), the tape drive assemblies, and the
cartridges must be installed at the custo
mer’s site.
Table 4-1 provides an annotated check list of XLS components, options, and accessories,
so you can ensure all required parts are available before starting the installation.
Item
Provided
by
Notes
LRM Qualstar
Built and pre-tested to customer specifications; includes
variable number of drive bays, cartridge bays, I/O ports,
power supplies, and HBAs. May include additional
cartridge storage areas behind the front panel and doors.
MEM Qualstar
As an option, one or two XLS-85000 or XLS-89000
MEMs can be attached to the XLS-8161100,
XLS-832700 or XLS-820500. One or two XLS-85000
MEMs can be attached to the XLS-812300. The MEMS
are shipped separately and installed at the customer
’s
site.
Expansion pods Qualstar
As an option, one or two expansion pods can be
attached to the XLS-812300. The expansion pods are
installed at the factory.
Tape drive assemblies Qualstar
The tape drives are installed in drive carriers at the
factory and are shipped separately.
Drive filler assemblies Qualstar
All unused tape drive locations require drive filler
assemblies, which are shipped separately.
Terminators for SCSI tape
drives
Qualstar A terminator is included with each SCSI tape drive.
Table 4-1 Installation check list