Qualstar XLS Series, Руководство по планировке объекта

Страница: 16 / 42

2.2 Moving the Library
2-2
501604 Rev. 07-01-19
If a library or MEM is to be moved to a different location, it must be repacked on the
pallet, using the packaging material that it was originally shiped with to avoid damage to
the equipment. If the pallet or original packaging material is not available, please contact
Qualstar Corporation to order replacements and recieve instruction on the repacking
procedure.
2.2.1 Door Clearance
Be sure to check all doors, corridors, and elevators along the route for adequate clearance.
Confirm that the door frames are square and that sides are parallel. The unpacked
dimensions are:
8161100: 44.6 x 35.7 inches (114 x 91 cm)
832700: 44.6 x 34.8 inches (114 x 89 cm)
820500: 34.6 x 34.8 inches (89 x 89 cm)
812300: 34.6 x 34.8 inches (89 x 89 cm). With one POD attached: 42.6 x 34.8 inches (109 x
89 cm). With two PODs attached: 50.5 x 34.8 inches (129 x 89 cm)
89000 MEM1: 34.8 x 34.8 inches (89 x 89 cm)
85000 MEM2: 22.4 x 34.8 inches (57 x 89 cm)
All units are 78 inches (199 cm) tall..
Important: While still packed in its shipping container a module
can be as large as 49 inches (125 cm) wide by 67 inched
(170 cm) deep and 89 inches (226 cm) tall. This may
make it difficult to manuver the equipmemt into
it’s
desired location while it is still packed.
The optional 8U auxiliary equipment rack and its
mounting hardware should be installed after the XLS is
in place.