Qualstar XLS Series, Руководство по планировке объекта

Страница: 17 / 42

XLS Library Site Planning Guide 11
3 Installing the Library
Ensure that the proposed installation location meets the requirements for the following:
•
Floor space, floor loading, and service access requirements. See Section 3.1 .
•
Environmental specifications. See Section 3.2 on page 3-18 .
•
Power. See Section 3.3 on page 3-18 .
•
Cooling. See Section 3.4 on page 3-21 .
3.1 Floor Space and Floor Loading
This section lists the floor space, floor loading, and service access requirements for the
following hardware:
•
XLS-8161100. See Section 3.1.1 on page 3-2
•
XLS-832700. See Section 3.1.2 on page 3-5 .
•
XLS-820500. See Section 3.1.3 on page 3-8 .
•
XLS-812300, including any expansion pods. See Section 3.1.4 on page 3-11 .
•
XLS-89000 Media Expansion Module (MEM). See Section 3.1.5 on page 3-13 .
•
XLS-85000 Media Expansion Module (MEM). See Section 3.1.5 on page 3-13 .
Before moving the XLS to its final destination, ensure that there is adequate floor space
available and that the floor is capable of holding the e
quipment’s weight.
Important:
Be sure to leave adequate space behind the library and any
attached MEMs to allow for service access to the following
components:
• Power/PC bay (includes the power switch and connector,
power supplies, battery module, system controller
components, and cooling fans)
• Tape drives
• Any equipment mounted in the optional equipment rack
When extended, the power/PC bay requires 12 inches (31
cm) of space.