3
QUALITY SERIES 2 PUMPS |
OPERATION, INSTALLATION & WARRANTY INFORMATION
knowledge, unless they are under supervision or instruction concerning use
of the product by a person responsible for their safety.
-
Children should be supervised, at all times to ensure they do not play with or
near the product.
-
Only a qualified person/s, should perform repairs and/or maintenance
work on the pump and motor.
-
-
APPLICATIONS
-
Carefully select the recommended pump to suit your pool.
See below the recommended pump and pool sizing chart.
-
The pump is self-priming and may be installed to a maximum height
of 300mm above the weir level.
-
If you choose to install your pump below the weir level, be sure to connect
a shut-off valve on your suction pipe between the pool weir/skimmer and
the pump. This will prevent your pump motor from being flooded and/or
damaged when you open the pump lid to clean the leaf basket.
-
The pump is intended for residential pool and spa use with a
maximum water temperature of 40°C.
PUMP INSTALLATION AND INSTRUCTIONS
-
Position the pump
on a firm, flat, level surface that is not exposed to flooding.
-
A minimum of 50mm PVC pipe to be used on the suction and return lines.
-
If solvent weld is used in the installation, allow 24 hours to dry, before running
the pump for the first time.
-
A certified electrician must do the electrical connection
in accordance with SANS 10142:
-
The voltage of the mains supply to the pool distribution board must
correspond to the indicated voltage of the product.
PUMPS SIZE FILTER SIZE
POOL VOLUME
0.6kW
2 bag sand filter
30 000 Litres
0.75kW
3 bag sand filter
60 000 Litres
1.1kW
4 bag sand filter
90 000 Litres
