5
QUALITY SERIES 2 PUMPS |
OPERATION, INSTALLATION & WARRANTY INFORMATION
-
Note that certain parts are subject to normal wear and tear, even when used
properly and must be replaced in due time, depending on type and duration
of use. These include but are not limited to:
-
Impeller
-
Shaft Seal
-
Motor Bearings
-
Pump lid and O-ring
-
Pump basket
-
Diffuser
-
All work listed in this manual must be performed regularly. If this maintenance
work cannot be performed by the end-user, an authorised person must be
commissioned to perform this work.
If these operations are neglected,
faults may arise which are the responsibility of the user. These include:
-
Damage to the motor, due to untimely or inadequate maintenance or cleaning of
the cooling fan cover
-
Corrosive or other damage caused by incorrect storage of
chemicals in pump enclosure
-
Damage due to the use of spare parts which are not original Fluidra parts
-
Damage due to maintenance and repair work not carried out by qualified technicians
-
To avoid personal injury do not have the pool pump running whilst there are
people in the pool/spa.
TROUBLESHOOTING
1.
Pump
not performing efficiently:
-
Blocked basket/s
-
Blocked impeller
-
Blocked suction pipe from weir to pump
-
Diffuser worn/blocked
-
Pool cleaner connected without skimmer valve
-
Filter blocked (backwash regularly)
-
Check pool cleaner and hoses for blockages/leaks
2.
Pump sucking air
:
-
Check for damaged pool cleaner pipes
-
Check for leak underground between weir and pump
-
Pump lid O-ring faulty
-
Loose fitting on suction thread of pump
-
Check O-ring on barrel union
-
Body or Lid damaged/cracked
