background image

SAFETY  PRECAUTIONS

Friendly to the environment this product does not use any chemicals or pesticides, is quiet running and efficient.

OPERATING  INSTRUCTIONS

For optimum operation avoid setting up the unit near any other strong light source or draughty 

  

area.

Connect the plug to a suitable electrical socket.

Switch the unit on.

MAINTENANCE

Always disconnect the unit from the power source before cleaning or emptying the trap.
The insect trap can be removed, emptied and washed with water.  

Always use the proper parts supplied with the unit.
The UV lamp has approximately a six month life, after which time it may need to be replaced.  To 
replace the bulb:

Unscrew the four screws holding the basket underneath the unit and gently remove.  Please note that this 

section is connect to the fan – care must be taken not to break the wires.

Unscrew the single screw in the clamp holding the bulb in place.

Remove the used bulb and replace with new bulb.

Re-screw the clamp in place.

Replace the basket and re-screw the four holding screws into place.

HOW  IT  WORKS

This Mosquito trap uses a UV Lamp, which can produce 360-400nm light to attract insects. The mosquito or insect 
is attracted to the light and enters the unit. The fan then sucks the mosquito/insect down into the trap when they 
quickly expire by a “drying out” method.

Rated voltage:220-240V~                                          Rated power:15W            
Rated frequency:50/60Hz                                          Power factor:0.55           

2

Tube type:56V/7W                                                      Effective area:300M  

Pothook

Fan

UV lamp

Base

Air

 

inlet

Rain cover

TiO  on the face of inside

2

Funnel holder

Mosquito storage box

Wall mounted

Prepare the tools such as electrical drill, Philip's head screw, marker etc.

Point out the location for installation, make sure there is electrical socket available around. Put the fixture     

    parts to the wall, use marker to mark down the 4 holes which need to be drill.

Drill the hole about 35mm in depth, and then put setscrew into the holes. 

Reference the above diagram, screw to fix the appliance on the wall.

Make sure the appliance is well fixed.

Plug in and the appliance will start running.

68mm

2

9

m

m

USE

 

METHOD

PLEASE READ THE FOLLOWING SAFETY INSTRUCTIONS CAREFULLY TO AVOID THE RISK OF ELECTRIC 
SHOCK, SHORT CIRCUIT, FIRE HAZARD AND DAMAGE TO THE UNIT

1.Keep out of reach of children. Children or any person with visual, mental or physical impairment should only  
    use this unit under the supervision of an adult responsible for their safety.
2.Do not tamper, modify or attempt to repair the plug, cord or unit. Repairs should only be carried out by a 
    qualified electrician or service technician.
3.Ensure that the unit is plugged into an electrical outlet of the correct voltage. The unit voltage is 220-240V~    
   50/60Hz
4

.

Avoid prolonged eye contact with the light.

5

.

Keep away from children. Children should be closely supervised if they are in the vicinity of the appliance when 

    it is operating.
6

.

Do not insert fingers or foreign objects into the appliance at any time.

7

.

Always disconnect from the electrical supply before emptying the insect container or cleaning the unit with a 

    soft dry cloth.

8

.

Keep away from all sources of moisture. Do not operate the unit near any water source.Do not expose the unit 

    to moisture or liquid at any time.
9.If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer 

or  his service agent or a similar qualified person in order to avoid a hazard.

10.

This appliances not intended for use by persons(including children) with reduce physical,sensory 

or mental capabilities,of lack of experience and knowledge,unless they have beengiven supervision 
or instruction concerning use of the appliance by a person responsible for their safety.

Photo

 

sensor

Отзывы: