INSXXXA-01/22
www.davisandshirtliff.com
Water Tank
Mini Valve
Manifold
Valve
Endcap
Drip to drip
connector
Drip Line
HDPE Pipe
Start
Connector
Filter
Fertigation
Unit
Installation Guide
DRIP IRRIGATION
KIT
8. Connect drip lines, unroll along the planting beds
and cut at the end of each bed. Note that drip lines
are laid along contour lines and never down-slope.
Emitters should be facing up and never against soil
to avoid sucking in particles after each irrigation
cycle.
9. Once all driplines are connected, connect water
supply, fill tank and flush main pipe and all drip lines
to remove any debris. Once this is satisfactorily
achieved, replace all plugs.
10.
Open the main valve and test the system for
uniformity, operating one valve at a time.
11. Periodic maintenance by filter cleaning and flushing
driplines at each end plug is vital to avoid sludge
and particle accumulation that result in emitter
clogging.
